Engineering

College of Aeronautics | worldwide.erau.edu All rights are reserved. The material contained herein is the copyright property of Embry-Riddle Aeronautical University, Daytona Beach, Florida, 32114. No part of this material may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of […]

ECE 220 PSpice Homework Voltage Divider and Current Divider Michael W. Marcellin In this tutorial assignment, you will learn to perform a simple circuit simulation in PSpice. You will learn more advanced techniques in your laboratory assignments. PSpice is a circuit simulator. In the old days, you had to enter your circuit diagram information by […]

ECE 220 PSpice Homework Voltage Divider and Current Divider Michael W. Marcellin In this tutorial assignment, you will learn to perform a simple circuit simulation in PSpice. You will learn more advanced techniques in your laboratory assignments. PSpice is a circuit simulator. In the old days, you had to enter your circuit diagram information by […]

Using the lead-tin phase diagram in Figure 6.3, determine the liquid and solid phase compositions for a nominal composition of 90% Sn and 10% Pb at 204°C (400°F). Part of the solution to this question is provided in the e-textbook. However, you need to (1) make marks and label on the phase diagram to show […]

College of Aeronautics | worldwide.erau.edu All rights are reserved. The material contained herein is the copyright property of Embry-Riddle Aeronautical University, Daytona Beach, Florida, 32114. No part of this material may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of […]

Problem 1) A 200-gram alloy of silver and gold consists of 60 wt% Ag and 40 wt% Au. What are the percentages of Ag and Au atoms in this alloy? Problem 2) Describe the properties related to bonding type and bonding energy for ceramics, metals, and polymers. Problem 3) Describe atomic number, atomic mass, and […]

Design a full-adder circuit List and describe the steps for the practical lab. A schematic of the experimental setup is also required.

write a 4-6 page paper in which you define the following four levels of testing for software development: 1) Unit testing 2) Integration testing 3) Systems testing 4) Acceptance testing. Be sure to cite your sources in this paper and be sure to use correct APA format

In this video, several terminologies were used such as terminal  blocks, DIN rails, and power distribution blocks. Select one of the  topics listed below. In your original post, Discuss the importance/role of your selected topic including relative terminology. In your opinion how would industry or the world be impacted if your selected topic did not […]